The Martin Audio CDD6 is an ultra-compact passive installation loudspeaker supplied as a pair, designed for professional AV systems that require high-quality sound from a discreet and practical cabinet format. Available in black or white, the CDD6 is suitable for both darker entertainment-led interiors and lighter architectural spaces where the loudspeaker needs to remain visually sympathetic to the venue design. Sitting above the smaller CDD5 in the Martin Audio CDD Series, the CDD6 uses a larger 6.5" low frequency driver to deliver increased output, improved low frequency response and greater system headroom. This makes it a strong choice for applications where a compact speaker is still required, but the room demands more presence and projection than a smaller cabinet can provide. Each loudspeaker features a 6.5" low frequency driver with a 1.5" voice coil and a 1" fabric dome high frequency driver. The coaxial driver arrangement supports clear, consistent audio from a compact point-source cabinet, making the CDD6 suitable for both background and foreground music systems, speech reinforcement and general commercial sound applications. A key strength of the CDD6 is Martin Audio’s Coaxial Differential Dispersion technology. The speaker’s coverage pattern is designed to provide wider horizontal dispersion close to the loudspeaker and more focused projection further into the room. In practical terms, this helps deliver more even sound levels across the listening area, reducing the need for excessive speaker quantities and supporting a more consistent customer or audience experience. With 150W AES power handling and 600W peak capability, the CDD6 provides strong output from a compact installation speaker. Its 8Ω nominal impedance makes it suitable for conventional low impedance amplifier systems, with amplifier loading calculated correctly where multiple loudspeakers are connected. The 80Hz–20kHz frequency response gives the speaker a full and balanced tonal character, while the 119dB peak SPL capability gives it useful headroom for more demanding commercial environments. The user-rotatable dispersion pattern provides additional installation flexibility. With 110°–80° horizontal coverage and 80° vertical coverage, the CDD6 can be adapted for vertical or horizontal mounting depending on the room layout, bracket position and listening area. This is particularly useful in venues where architectural restrictions, sightlines or wall positions affect the ideal loudspeaker placement. The CDD6 is well suited to restaurants, bars, cafés, hotels, retail stores, offices, museums, galleries, education spaces, meeting rooms, reception areas and multi-purpose commercial venues. It can be used as a standalone compact full-range loudspeaker or combined with suitable subwoofers where greater low frequency impact is required for music-led spaces. The enclosure is manufactured from rigid composite material and has a 9 litre cabinet volume, providing a durable construction for fixed installation use. At 210mm x 325mm x 210mm per speaker and 5kg each, the CDD6 remains compact enough for discreet wall or ceiling mounting while offering a clear performance increase over smaller ultra-compact models. M6 inserts are provided for bracket mounting, supporting professional installation in a wide range of commercial AV projects. The Martin Audio CDD6 pair is a strong choice for installations requiring compact passive loudspeakers with premium audio quality, controlled coverage and flexible mounting options. With black and white versions available, it provides a professional solution for commercial spaces where clear sound, architectural discretion and reliable long-term performance are all required.

Read more less

The Martin Audio CDD5TX-WR is a compact weatherised installation loudspeaker supplied as a pair, designed for professional audio systems that require discreet styling, high-quality sound and 70V/100V line operation. Available in black or white, it is well suited to both indoor commercial spaces and selected outdoor or semi-exposed areas where the loudspeaker will be sheltered from direct exposure to the elements. As the transformer-equipped weatherised version of the CDD5, the CDD5TX-WR is ideal for distributed audio systems where multiple loudspeakers are required across a wider area or several zones. The integrated 70V/100V transformer provides selectable tap settings, helping installers balance speaker output, amplifier loading and system coverage. A low impedance 8Ω option is also available, giving additional flexibility for conventional amplifier configurations. Each loudspeaker uses a 5.25" low frequency driver with a 1.25" voice coil and a 0.75" fabric dome high frequency driver. This two-way coaxial design uses Martin Audio’s Coaxial Differential Dispersion technology, providing wide and consistent coverage from a compact cabinet. The user-rotatable drive unit allows the dispersion pattern to be adapted for vertical or horizontal installation, giving greater control when working with different room layouts, mounting positions and coverage requirements. With 100W AES power handling and 400W peak capability, the CDD5TX-WR provides strong performance for a compact installation speaker. It is suitable for background music, foreground music, speech reinforcement and distributed commercial audio applications in bars, restaurants, hotels, leisure facilities, retail spaces, museums, galleries, transport hubs, concourses and covered external hospitality areas. The weatherised design makes the CDD5TX-WR particularly useful for spaces where environmental conditions may change, while still requiring a professional audio solution. The speaker is rated to IP54 when correctly installed and includes a water and particle resistant grille, weatherproof input panel cover and dual cable glands. This allows cabinets to be daisy-chained without the need for external breakout boxes, supporting a cleaner and more efficient installation. The cabinet is manufactured from rigid ABS and features a compact 3 litre enclosure. At 160mm x 230mm x 149mm per speaker, the CDD5TX-WR is easy to position discreetly on walls or ceilings while still delivering clear, full-range audio. The supplied weatherised pan and tilt brackets provide practical mounting flexibility and are available to match the selected black or white speaker finish. The CDD5TX-WR offers a frequency response of 100Hz–20kHz ±3dB, with low frequency extension down to 70Hz at -10dB. This makes it suitable for clear music playback and speech reproduction in smaller commercial areas or as part of a larger multi-speaker system. For installations requiring greater bass impact, it can also be integrated with a suitable subwoofer as part of a wider Martin Audio system. The Martin Audio CDD5TX-WR pair is a strong choice for commercial AV projects requiring compact weatherised speakers with 100V line capability, premium sound quality and architectural discretion. With black and white finish options, supplied mounting hardware and flexible transformer settings, it provides a professional loudspeaker solution for both indoor and sheltered outdoor installations.

Read more less

The Martin Audio CDD5 is an ultra-compact passive installation loudspeaker supplied as a pair, designed for professional AV systems where high-quality sound needs to be delivered from a discreet and space-efficient cabinet. Available in black or white, the CDD5 is suitable for a wide range of commercial interiors, allowing the speaker finish to be matched to the surrounding décor, ceiling detail, wall colour or venue design. As part of Martin Audio’s CDD Series, the CDD5 uses Coaxial Differential Dispersion technology to provide controlled, consistent coverage from a compact enclosure. This makes it particularly effective in commercial spaces where listeners may be positioned across a wide area rather than directly in front of the loudspeaker. The dispersion pattern is designed to offer wider coverage close to the speaker and more focused projection further into the room, helping deliver a balanced listening experience with fewer obvious hot spots. Each speaker combines a 5.25" low frequency driver with a 0.75" fabric dome high frequency driver in a two-way passive configuration. This coaxial arrangement helps deliver a smooth and coherent sound from a single compact cabinet, making the CDD5 suitable for background music, foreground music, speech reinforcement and distributed commercial audio systems. It is well suited to restaurants, bars, cafés, retail environments, hotels, offices, museums, galleries, meeting rooms, reception areas and education facilities. With 100W AES power handling and 400W peak capability, the CDD5 provides strong performance for its size. The 8Ω nominal impedance makes it suitable for conventional low impedance systems using appropriate amplification. Where multiple speakers are used across a venue, amplifier loading should be calculated correctly to ensure reliable system performance and suitable power delivery. The CDD5 offers a frequency response of 100Hz–20kHz ±3dB, with low frequency extension down to 70Hz at -10dB. This gives the speaker a clear and balanced tonal character for everyday commercial music and speech applications. For installations requiring additional bass extension or more impact, the CDD5 can also be integrated with a suitable Martin Audio subwoofer as part of a wider system design. A key benefit of the CDD5 is its user-rotatable dispersion, specified at 120°–90° horizontal by 80° vertical. This allows the coverage pattern to be adapted depending on whether the speaker is installed vertically or horizontally. In practical terms, this gives installers greater flexibility when working with different room layouts, wall positions and audience areas, while still maintaining controlled sound coverage. The cabinet is manufactured from rigid moulded ABS, giving the speaker a durable yet lightweight construction suitable for fixed installation. At just 160mm x 230mm x 149mm per speaker and 2.7kg each, the CDD5 is compact enough for discreet installation while still offering a professional level of output and clarity. The included brackets support practical wall or ceiling mounting, making the speaker suitable for a broad range of installed AV applications. The Martin Audio CDD5 pair is a strong choice for commercial audio projects requiring compact passive loudspeakers with premium sound quality, flexible mounting and a clean architectural finish. With black and white versions available, it can be specified for both darker entertainment-led spaces and lighter architectural interiors, making it a versatile option for professional background and foreground music systems.

Read more less

The Martin Audio Ceiling Speaker Construction Ring 6 Pack is designed to provide a secure fixing point for Martin Audio C4.8T, C6.8T and C8.1T ceiling loudspeakers when additional support is required within the ceiling structure. Available in three model-specific versions, the construction ring helps reinforce weaker ceiling materials and supports a more robust loudspeaker installation. This single listing covers the three compatible construction ring options for the Martin Audio ceiling speaker range. The ASF20097 version is designed for the C4.8T, the ASF20099 version is designed for the C6.8T, and the ASF20101 version is supplied for the C8.1T 6-pack option. Each variant is sized to match the correct speaker cut-out and should be selected according to the ceiling speaker model being installed. These construction rings are particularly useful when installing ceiling speakers into materials that may not be strong enough to support the speaker weight on their own. This can include lightweight suspended ceiling tiles, plasterboard, ceiling panels or other surfaces where a more secure load-spreading fixing arrangement is required. By spreading the mounting load across a wider area, the ring supports a cleaner and more dependable installation. Each ring features a zinc plated finish and includes four 5mm fixing holes, allowing the installer to create a secure fixing framework around the speaker opening. The ring is designed to sit above the ceiling material, providing additional support around the cut-out and helping the speaker’s mounting system clamp more effectively. The C4.8T construction ring has a 179mm centre opening and a stated weight of 0.44kg per ring. The C6.8T construction ring has a 225mm centre opening and weighs 0.5kg per ring. The C8.1T construction ring has a 309mm centre opening and weighs 0.54kg per ring. All versions use a 1mm material thickness and an overall ring length of 640mm, with fixing centre dimensions of 610mm and 408mm. For commercial AV installations, construction rings are a practical accessory when ceiling loudspeakers need to be fitted securely and professionally. They are well suited to projects in offices, retail spaces, hospitality venues, education buildings, meeting rooms, restaurants, reception areas and other commercial environments where ceiling speaker installations need to be completed to a high standard. The Martin Audio Ceiling Speaker Construction Ring 6 Pack is a useful addition when specifying or installing C4.8T, C6.8T or C8.1T ceiling speakers, especially where the ceiling substrate requires reinforcement. By selecting the correct variant for the speaker model, installers can achieve a neater, more secure and more reliable ceiling speaker installation.

Read more less

The Martin Audio C8.1T is a high-performance 8” two-way ceiling loudspeaker designed for commercial audio installations where stronger output, controlled dispersion and professional sound quality are required from a discreet flush-mounted format. As the largest model in the Martin Audio Ceiling Series, it is particularly well suited to higher ceiling spaces and more demanding environments where smaller ceiling speakers may not provide enough projection or headroom. Built around an 8” low frequency driver and a 1” dome tweeter, the C8.1T delivers a full, clear and controlled sound for both music and speech applications. The larger driver gives the speaker improved low frequency performance and greater output capability, making it suitable for foreground music systems as well as high-quality background audio. Typical applications include restaurants, bars, hotels, retail spaces, offices, education buildings, meeting rooms, conference areas, reception spaces and commercial hospitality environments. The C8.1T has been designed with a controlled 90° conical dispersion pattern, helping focus sound into the listening area and maintain intelligibility in more reverberant rooms. This makes it especially useful in spaces with higher ceilings, harder surfaces or more challenging acoustics, where wide-dispersion ceiling speakers may spread sound too broadly. The result is a more controlled coverage pattern that supports clearer speech and a more consistent listening experience. The speaker includes an integrated 70V/100V line transformer, making it suitable for distributed audio systems where multiple ceiling speakers are required across larger areas or several zones. Transformer taps are selectable at 60W, 30W and 15W on 100V line systems, with an additional 7.5W tap available on 70V systems. A 16Ω low impedance option is also included, giving installers flexibility when designing either high impedance or traditional low impedance systems. With 125W AES power handling and 500W peak capability, the C8.1T provides strong performance for commercial installations requiring higher output from a ceiling speaker. Its frequency response of 80Hz–18kHz, with extension down to 50Hz at -10dB, gives it a fuller tonal balance than smaller ceiling models. This makes it a practical choice where music quality is a priority, particularly in hospitality and retail environments where the sound system forms part of the overall customer experience. The enclosure uses a steel backcan with a perforated steel grille, providing a robust and professional construction for fixed installation. The white UV-resistant bezel and grille offer a clean architectural finish and can be overpainted where a closer match to the ceiling is required. The speaker is supplied with tile rails, a C bracket, paint mask and cut-out template, helping support a structured and efficient installation process. The C8.1T requires a 308mm ceiling cut-out and has an outside diameter of 354mm with a depth of 258mm. At 6.7kg, it is a substantial ceiling loudspeaker and should be installed into a suitable ceiling structure using appropriate fixings and support. The rising clamp plug and socket connector arrangement supports pre-wiring, while input and link terminals make it practical for larger distributed systems. The Martin Audio C8.1T is a strong choice for professional ceiling speaker installations requiring higher SPL capability, controlled coverage and flexible 70V/100V or 16Ω operation. It provides a premium solution for commercial spaces where discreet ceiling integration is required without compromising on output, clarity or system design flexibility.

Read more less

The Martin Audio C6.8T is a 6.5” two-way ceiling loudspeaker designed for professional commercial audio installations where strong full-range performance, wide coverage and a discreet flush-mounted finish are required. With its enclosed steel backcan, white architectural grille and flexible 70V/100V or 16Ω operation, it is a practical choice for high-quality background and foreground music systems across a wide range of commercial spaces. Using a 6.5” carbon fibre loaded polypropylene bass driver and a 0.8” dome tweeter, the C6.8T delivers a more substantial sound than smaller ceiling speakers while remaining compact enough for standard ceiling installations. It is well suited to restaurants, cafés, bars, hotels, retail stores, offices, meeting rooms, education facilities, reception areas and hospitality spaces where clean aesthetics and consistent sound coverage are both important. The side-by-side driver arrangement is designed to provide smooth off-axis response, helping the speaker maintain clarity and tonal balance across a wide listening area. With 150° conical dispersion up to 7kHz, the C6.8T is particularly effective in lower ceiling environments where broad coverage can help reduce the total number of loudspeakers required. This makes it a useful option for installers looking to achieve even audio distribution without overcomplicating the system design. The C6.8T includes an integrated 70V/100V line transformer, making it suitable for distributed speaker systems where multiple ceiling speakers are required across larger areas or multiple zones. The transformer tap settings allow the speaker power to be configured to suit the room size, desired volume level and available amplifier capacity. A 16Ω low impedance option is also available, giving additional flexibility where conventional low impedance operation is preferred. With 75W AES power handling and 300W peak capability, the C6.8T offers dependable performance for commercial audio systems that need more output and headroom than an entry-level ceiling speaker. Its frequency response of 90Hz–20kHz provides a balanced sound for music and speech, while the 106dB continuous and 112dB peak SPL capability gives it the capacity to perform in more demanding spaces. The speaker is supplied with useful installation accessories, including tile rails, a C bracket, paint mask and cut-out template. These components help support a professional installation process, particularly in suspended ceiling applications. The rising clamp plug and socket connection also allows for efficient pre-wiring on site, helping streamline larger commercial projects. The C6.8T features a steel backcan and perforated steel grille for durability and a clean installed appearance. The white UV-resistant bezel and grille are overpaintable, allowing the speaker to blend more closely with the surrounding ceiling finish where required. With a 260mm outside diameter, 181mm depth and 224mm cut-out requirement, it provides a compact but capable ceiling speaker solution for professional AV installations. The Martin Audio C6.8T is a strong choice for commercial ceiling audio systems where reliable performance, wide dispersion and flexible 100V line operation are required. It offers a professional balance of sound quality, installation convenience and architectural discretion, making it suitable for both new installations and system upgrades.

Read more less

The Martin Audio C4.8T is a compact two-way ceiling loudspeaker designed for commercial installations where discreet appearance, wide coverage and clear audio performance are required. Built for flush-mount ceiling applications, it is particularly well suited to low ceiling environments where an even spread of sound is needed across the listening area without using a large number of loudspeakers. Featuring a 4" low frequency driver and a 0.8" dome tweeter mounted side by side on the baffle, the C4.8T is designed to deliver smooth off-axis response and strong intelligibility from a compact ceiling format. This makes it a suitable choice for background music, speech reinforcement and general commercial audio systems in restaurants, cafés, retail stores, offices, hotels, education facilities, meeting rooms, reception areas and hospitality spaces. The C4.8T includes both high impedance and low impedance operation, giving installers flexibility across different system designs. The integrated 70V/100V line transformer makes it suitable for distributed speaker systems where multiple loudspeakers are required across a wider area or across several zones. Transformer tap options allow the loudspeaker to be set at appropriate power levels for the room, helping manage amplifier loading and system balance. A 16Ω low impedance option is also available for installations that require conventional low impedance operation. With 40W AES power handling and 160W peak capability, the C4.8T offers dependable performance for day-to-day installed audio applications. Its frequency response of 100Hz–20kHz provides a clear and balanced sound for background music and speech, while the wide 180° conical dispersion up to 10kHz helps maintain consistent coverage in rooms where listeners may be positioned across a broad area rather than directly beneath each speaker. The speaker is housed in a steel backcan and fitted with a perforated steel grille, giving it a robust construction suitable for professional installation work. The white UV-resistant bezel and grille provide a clean architectural finish and can be overpainted where a closer match to the ceiling finish is required. This makes the C4.8T a strong option for projects where the loudspeaker needs to blend neatly into the building interior. Installation is supported by the included tile rails, C bracket, paint mask and cut-out template. These accessories help streamline fitting into suitable ceiling structures and support a professional installation finish. The speaker requires a 178mm cut-out and has an outside diameter of 205mm with a depth of 131mm, making it practical for compact ceiling voids where space is limited. The C4.8T is also designed for pre-wiring convenience, using a rising clamp plug and socket connection system. This is useful for commercial projects where cabling and speaker fitting may be completed in stages, helping improve installation efficiency on site. Its steel backcan and listed safety approvals also make it suitable for specified professional environments where installed speaker compliance and build quality are important considerations. The Martin Audio C4.8T is a strong choice for compact commercial ceiling speaker systems requiring high intelligibility, wide dispersion and flexible 70V/100V or 16Ω operation. Its discreet finish, included installation accessories and reliable two-way design make it well suited to professional AV installations where clean aesthetics and consistent sound coverage are both essential.

Read more less

The Martin Audio ASF09007 is a weatherised connector cover kit designed to provide additional rear connection protection for compatible Martin Audio installation loudspeakers. Finished in black only, it is primarily used with the ADORN A80T when the speaker is being installed in outdoor or semi-exposed environments where improved weather resistance is required. When fitted correctly to the Martin Audio ADORN A80T, the ASF09007 helps upgrade the loudspeaker to an IP54 rating. This makes it a practical accessory for covered outdoor hospitality areas, terraces, external seating zones, entrance areas, leisure venues and commercial spaces where the speaker may be exposed to moisture, dust or changing environmental conditions. It is important to ensure the full installation is carried out correctly, including cable entry, sealing and mounting, to maintain the intended weather-resistant performance. The kit includes the weatherised connector cover, fixing screws, gasket seal and cable gland, providing the core components required to protect the loudspeaker’s rear connection area. The design includes a left-side hole for the input cable and a right-side knockout for an optional daisy-chain cable, making it suitable for installations where multiple loudspeakers are linked as part of a distributed audio system. Manufactured from weather-resistant ASA plastic, the ASF09007 is designed for durability in professional installation environments. Its black finish matches black ADORN A80T loudspeakers and is suitable for darker architectural finishes, external structures, entertainment spaces and exposed installation areas where a discreet black accessory is preferred. In addition to its use with the ADORN A80T, the ASF09007 is also listed by Martin Audio as a replacement part for CDD10-WR, CDD10TX-WR, CDD12-WR and CDD15-WR loudspeakers. These weather-resistant CDD models are supplied with the cover as part of their IP54-rated configuration, making this kit useful for maintenance, service work or replacement where the original cover has been damaged or misplaced. With an approximate size of 88mm x 83mm x 60mm and a lightweight 0.2kg construction, the ASF09007 is a compact installation accessory that plays an important role in protecting compatible Martin Audio loudspeaker connections. It is a sensible addition when specifying ADORN A80T speakers for outdoor or semi-exposed projects, particularly where long-term reliability and a clean professional finish are key priorities.

Read more less

The Martin Audio AIPKIT is a weatherised connector cover kit designed for use with ADORN A40, A40T, A55 and A55T on-wall loudspeakers. Available in black or white, it provides a neat and practical accessory for installations where compatible ADORN speakers need additional protection around the rear connection area. This kit is intended for outdoor or semi-exposed loudspeaker installations where moisture and environmental exposure need to be managed correctly. When fitted to a compatible ADORN speaker in accordance with Martin Audio guidance, the AIPKIT upgrades the loudspeaker to an IP54 rating. This makes it suitable for selected protected outdoor applications, including covered terraces, external hospitality areas, entrance canopies, outdoor retail spaces and other sheltered commercial environments. The AIPKIT includes the connector cover, screws, rubber gasket seal and cable gland required for installation. The cable gland supports cable diameters from 6mm to 10mm, helping create a more secure and weather-resistant connection point. The cover also includes an input cable hole and knockout provision for an optional daisy-chain cable, giving installers additional flexibility when working with multiple speakers in a distributed audio system. Manufactured from weather-resistant ASA plastic, the cover is designed to complement the ADORN speaker range while providing added protection to the connection area. The black version is well suited to darker cabinets, exposed ceilings and entertainment-led spaces, while the white version is ideal for lighter architectural interiors or white ADORN speaker installations. The Martin Audio AIPKIT is a small but important accessory for compatible ADORN installations where the loudspeaker will be used beyond a standard indoor environment. It helps maintain a clean installation finish while supporting improved weather resistance for A40, A40T, A55 and A55T speaker systems.

Read more less

The Martin Audio ADORN A80T is a compact 8" on-wall loudspeaker designed for professional commercial audio installations where higher output, stronger bass response and flexible system configuration are required. Supplied individually and available in black or white, the A80T is suitable for a wide range of installed sound environments where premium performance is needed from a cabinet that remains practical and visually discreet. As the largest on-wall model in the ADORN surface-mount range, the A80T delivers a clear step up in output and low frequency capability compared with the smaller A40T and A55T models. It is well suited to background and foreground music systems in restaurants, bars, cafés, retail stores, hotels, schools, offices, conference spaces, leisure venues and wider commercial buildings. Its compact point source format also makes it useful for areas where sound quality and controlled coverage are required without moving to a larger performance loudspeaker. The A80T uses an 8" low frequency driver with a 2" high-temperature voice coil, paired with a 1" polymer dome high frequency compression driver mounted on a 90° x 50° horn. This driver configuration gives the speaker strong output, clean midrange and controlled high frequency projection, making it suitable for both music playback and speech applications. The 63Hz–17kHz frequency response provides a full and balanced sound, with useful low frequency extension for a compact wall-mounted cabinet. A key feature of the A80T is its integrated 70V/100V line transformer. This allows the loudspeaker to be used within distributed audio systems where multiple speakers are required across larger areas or several zones. The selectable transformer taps make it easier to manage amplifier loading, system level and coverage across the installation. For projects requiring a traditional low impedance configuration, the A80T also includes an 8Ω operating option, giving installers added flexibility when specifying amplification and system design. With 200W AES power handling and 800W peak capability, the A80T is designed for applications that need more headroom than smaller commercial installation speakers. It can produce up to 120dB peak SPL at 1 metre, making it suitable for venues where foreground music, higher ambient noise levels or larger room coverage are part of the brief. The 90° x 50° dispersion pattern provides controlled coverage, helping direct sound into the listening area and maintain clarity across the room. The cabinet is manufactured from ABS and fitted with a perforated steel grille for a clean, durable and professional finish. Black and white versions are available, allowing the speaker to be matched to darker entertainment spaces or lighter architectural interiors. The cabinet can also be painted where a more specific finish is required, subject to suitable preparation and installation practice. Installation is supported by the supplied WB6/8 wall bracket, which allows the speaker to be mounted vertically or horizontally depending on the coverage requirement and room layout. The enclosure measures 246mm x 421mm x 233mm excluding the bracket and weighs 9.08kg, making it substantial enough for higher output commercial use while remaining manageable for fixed wall-mounted installation when fitted to a suitable structure. The A80T also includes low and high frequency overload protection, supporting dependable performance in commercial systems that may operate for long periods each day. For selected outdoor or semi-exposed applications, the cabinet can achieve an IP54 rating when fitted with the optional weatherised connector cover, subject to correct installation. The Martin Audio ADORN A80T is a strong choice for commercial AV projects that require a higher-output 100V on-wall speaker with premium sound quality, flexible installation options and a clean architectural finish. It is particularly well suited to venues that need a compact speaker format but require more power, bass extension and projection than smaller surface-mount loudspeakers can provide.

Read more less

The Martin Audio ADORN A55T is a compact 100V on-wall loudspeaker supplied as a pair, designed for commercial audio installations where premium sound quality, discreet styling and flexible system design are required. Available in black or white, the A55T is suitable for a wide range of professional environments, from hospitality and retail spaces through to education, corporate and multi-zone commercial audio systems. As the transformer-equipped version of the ADORN A55, the A55T is designed for 70V and 100V line installations. This makes it particularly well suited to distributed audio systems where multiple loudspeakers are required across larger areas, several rooms or different zones. The built-in transformer allows each loudspeaker to be tapped at the appropriate power level, helping installers balance volume, amplifier capacity and overall system design more efficiently. Each speaker features a 5.25" low frequency driver and a 0.75" silk dome high frequency driver, delivering clear, balanced audio from a compact enclosure. Compared with smaller 4" models, the A55T offers increased output, improved low frequency response and greater headroom, making it a strong option where a more substantial sound is required without moving to a larger cabinet format. With 50W AES power handling and 200W peak capability, the ADORN A55T is suitable for background music, foreground music and general commercial sound reinforcement. Its 90Hz–17kHz frequency response, with extension down to 65Hz at -10dB, gives the speaker a full and controlled sound for everyday installed audio use. For venues requiring additional bass impact, the A55T can also be integrated with a suitable subwoofer as part of a wider system design. The wide 110° x 80° dispersion pattern helps provide even sound coverage across the listening area. This is especially useful in commercial spaces where customers, guests or staff may be moving around rather than listening from one fixed position. The result is a more consistent audio experience across the room, reducing harsh hotspots and helping maintain clarity throughout the space. The A55T is well suited to restaurants, bars, cafés, hotels, retail stores, offices, meeting rooms, school facilities, reception areas and hospitality venues. The black finish is ideal for darker interiors, exposed ceilings and entertainment spaces, while the white finish is better suited to lighter walls, ceilings and architectural environments where the loudspeaker needs to remain visually discreet. Installation is straightforward thanks to the included wall brackets, allowing each loudspeaker to be mounted vertically or horizontally depending on the layout of the room and the required coverage. The compact cabinet measures 152mm x 245mm x 140mm per speaker and weighs 2.81kg, making it practical for a wide range of fixed installation projects when mounted to a suitable surface. The enclosure is manufactured from ABS and fitted with a perforated steel grille, providing a durable and professional finish for commercial environments. The speaker also includes low and high frequency overload protection, supporting reliable performance in systems that may be used for long operating periods or by non-technical staff. The Martin Audio ADORN A55T pair is a strong choice for 100V commercial audio systems where compact size, wide coverage and premium sound quality are required. With black and white finish options, flexible transformer tap settings and included wall brackets, it provides an installer-friendly loudspeaker solution for high-quality background and foreground music systems.

Read more less

The Martin Audio ADORN A40T is a compact 100V on-wall loudspeaker designed for commercial audio installations where high quality sound, discreet styling and flexible system design are all required. Supplied as a pair and available in black or white, the A40T is a strong choice for venues that need premium background or foreground music from a compact speaker format. Each speaker features a 4" low frequency driver and a 0.75" silk dome high frequency driver, delivering a clear and balanced sound suitable for a wide range of installed audio environments. The compact cabinet makes the A40T ideal for areas where wall space is limited or where the audio system needs to blend neatly into the interior design. Typical applications include restaurants, cafés, bars, retail stores, hotels, offices, meeting rooms, education spaces and hospitality venues. The key difference between the A40T and the standard low impedance A40 is the built-in 70V/100V line transformer. This makes the A40T particularly useful for distributed speaker systems where multiple loudspeakers are required across larger areas or multiple zones. The transformer taps allow the system designer or installer to set each speaker to the appropriate power level, helping balance coverage, amplifier capacity and volume across the installation. For additional flexibility, the A40T also includes a 16Ω low impedance option. With 40W AES power handling and 160W peak capability, the A40T offers strong output for its compact size. The wide 110° x 80° coverage pattern helps deliver consistent sound across the listening area, making it suitable for both background music and more present foreground audio. This is particularly useful in commercial spaces where customers or staff may be positioned across a broad area rather than directly in front of the loudspeakers. The A40T has a frequency response of 98Hz–17kHz ±3dB, with bass extension down to 70Hz at -10dB. For many commercial background music systems, this provides a full and comfortable sound without the need for large speaker cabinets. Where additional low frequency impact is required, the A40T can also be paired with a suitable subwoofer as part of a wider Martin Audio system. Installation is straightforward thanks to the included wall brackets, allowing each loudspeaker to be mounted vertically or horizontally depending on the room layout and coverage requirement. The cabinet measures just 124mm x 200mm x 114mm per speaker and weighs 2.13kg, making it practical for a wide range of fixed installation projects when mounted to a suitable surface. The ABS enclosure and perforated steel grille provide a durable finish for commercial environments, while the black or white colour options make it easier to match the speaker to the venue décor. The A40T can also achieve an IP54 rating when used with the optional weatherised connector cover, making it suitable for certain protected outdoor applications when correctly specified and installed. The Martin Audio ADORN A40T pair offers a professional 100V speaker solution for compact commercial audio systems. It is especially well suited to projects where dependable Martin Audio performance is required in a discreet, installer-friendly cabinet with flexible tap settings and clean architectural styling.

Read more less