The FBT Ventis 112A is a professional active 2 way point source loudspeaker designed for live sound, fixed installation and portable AV applications where strong output, clear sound and flexible onboard control are required. Built around a 12" low frequency driver and 1" high frequency compression driver, it provides a high-performance solution for venues, schools, houses of worship, theatres, bars, AV installers, hire companies, DJs and small to medium live performance spaces. The Ventis 112A is part of the FBT Ventis range, which is designed for both installed and portable professional audio use. It combines a custom 12" low frequency woofer with a 2.5" voice coil and a 1" exit throat B&C high frequency compression driver with a 1.4" voice coil. This driver configuration gives the speaker the scale and output required for full-range speech, music playback and live performance, while still maintaining the controlled coverage and clarity expected from a professional point source loudspeaker. Power is delivered through integrated bi-amplification, with 700W RMS dedicated to the low frequency section and 200W RMS for the high frequency section. This gives the loudspeaker a total built-in amplifier power rating of 900W RMS, with peak amplifier power listed at 1800W. By using onboard amplification, the Ventis 112A removes the need for external amplifier matching, making it easier to deploy in portable systems while also simplifying specification for fixed installations. The loudspeaker offers a frequency response of 42Hz to 20kHz at -6dB, making it suitable for a broad range of applications, from speech and vocal reinforcement through to music playback and live band use. With a maximum SPL of 126dB continuous and 133dB peak, the Ventis 112A provides a noticeable increase in output over smaller cabinets in the range, making it suitable for larger rooms, more demanding events and applications where a stronger full-range cabinet is required. Coverage is handled by an 80° x 50° constant directivity horn, which can be rotated to suit horizontal or vertical use. This gives installers and system designers additional flexibility when placing the cabinet in different environments. In a fixed installation, the rotatable horn can help optimise audience coverage when the speaker is wall-mounted, flown or used in a horizontal orientation. For portable use, it allows the cabinet to adapt more easily to different room layouts and performance spaces. The onboard DSP gives the Ventis 112A a high level of practical control. FBT lists six pre-optimised settings, plus two further user memory slots that allow custom settings to be created using five parametric equalisers per slot. This allows the speaker to be adjusted for different applications such as speech, DJ playback, live music, touring use or warmer background music reproduction. The DSP also includes adjustable delay between 0 and 10m, making it useful for delay-fill, distributed sound and alignment work in smaller systems. Connectivity is designed for professional and general AV use. The input panel includes an XLR/jack combo socket, XLR link output and RCA stereo input. The XLR/jack combo input is suitable for mixers, processors, audio interfaces and professional source equipment, while the XLR link output allows signal to be passed to another speaker. The RCA stereo input provides a useful option for simpler playback sources, making the Ventis 112A flexible enough for both live sound and fixed AV applications. The cabinet is constructed from 15mm birch plywood with internal bracing and a scratch-resistant finish, giving it a robust feel for professional use. This makes the Ventis 112A suitable for venues, schools, hire companies and event users who need equipment that can handle regular movement, transport and installation. It also includes two aluminium handles, making the cabinet easier to manage during setup and pack-down. For installation and deployment, the Ventis 112A includes six M10 suspension points, optional wall bracket compatibility, a 35mm speaker stand socket and a 45° monitor taper. This means it can be used as a main PA speaker, floor monitor, fixed installation loudspeaker, delay speaker or part of a wider system with subwoofers. In schools and venues, it can support assemblies, performances and events. In hospitality and leisure spaces, it can provide clear, powerful sound for entertainment, DJs and live music. The FBT Ventis 112A measures 387 x 665 x 380mm and weighs 20.6kg, making it a manageable but powerful 12" active cabinet. Transport dimensions are listed as 500 x 765 x 470mm, with transport weight listed at 23.1kg. For customers looking for a professional active loudspeaker with strong full-range performance, onboard DSP, rotatable coverage, birch plywood construction and flexible installation options, the Ventis 112A is a capable solution for both portable and fixed sound reinforcement systems.

Read more less

The FBT Ventis 110A is a professional active 2 way point source loudspeaker designed for live sound, fixed installation and portable AV applications where clear output, compact cabinet design and flexible onboard processing are required. Built around a 10" low frequency driver and 1" high frequency compression driver, it provides a strong balance of output, vocal clarity and musical performance, making it suitable for venues, schools, houses of worship, bars, gyms, theatres, AV installers, hire companies and small to medium live performance spaces. The Ventis 110A uses integrated bi-amplification, with 700W RMS dedicated to the low frequency section and 200W RMS for the high frequency section. This gives the loudspeaker a total amplifier power rating of 900W RMS, with peak amplifier power listed at 1800W. The result is a compact but capable active speaker that can deliver high sound pressure levels without requiring an external amplifier rack. FBT lists the Ventis 110A with 124dB continuous SPL and 131dB peak SPL, making it suitable for a wide range of speech, playback and live music applications. The driver configuration includes a custom 10" low frequency woofer with a 2" voice coil and a 1" exit B&C high frequency compression driver with a 1.4" voice coil. This should be displayed in the product specification block as Low Frequency Driver: 1x 10" (VC 2") and High Frequency Driver: 1x 1" (VC 1.4"). This configuration allows the Ventis 110A to provide a frequency response of 58Hz to 20kHz at -6dB, giving it useful low-end extension for a 10" cabinet while still maintaining detailed high frequency output for speech and music. A rotatable 80° x 50° constant directivity horn gives the speaker additional installation flexibility. The horn can be rotated to suit horizontal or vertical cabinet orientation, helping installers optimise coverage for the room or application. This is particularly useful for fixed installations, stage monitoring, under-balcony positions, front fill use and distributed loudspeaker systems where the cabinet may need to be installed in a specific orientation to suit sightlines, mounting points or coverage requirements. The onboard DSP is a key feature of the Ventis 110A. It includes six pre-optimised presets, plus two further user memory slots that allow users to create and store their own settings using five parametric EQ filters per slot. This makes the speaker adaptable across different operating environments, from vocal reinforcement and DJ playback through to live performance, touring use and warmer playback settings. Additional DSP functions include adjustable delay from 0 to 10 metres, helping align speakers in smaller distributed systems or delay-fill applications. The input panel is designed for practical professional use. Connectivity includes an XLR/jack combo input, XLR link output and RCA stereo input. The combo input supports connection from mixers, processors, controllers and professional audio sources, while the link output allows signal to be passed on to another speaker. The RCA stereo input gives additional flexibility for simpler playback sources, making the speaker useful for both professional and general AV applications. Input impedance is listed at 22kOhm. The cabinet is built from 15mm birch plywood with a scratch-resistant finish, giving it a more robust construction than many moulded plastic active speakers. This makes the Ventis 110A suitable for portable work, venue use and professional installations where durability is important. The cabinet also includes an integrated handle, a 35mm pole mount and a 45° monitor taper, allowing it to be used as a main PA speaker, pole-mounted cabinet or stage monitor depending on the system requirement. It also includes six M10 suspension points and optional wall bracket compatibility for installed applications. For AV installers and venues, the Ventis 110A is a strong choice where a compact active loudspeaker needs to deliver professional output without taking up excessive space. It can be used as a standalone speaker for smaller rooms, as part of a stereo PA system, as a stage monitor, or with subwoofers for larger music-focused systems. In schools, churches and community venues, it offers enough flexibility for speech, playback, live performance and event use. In hospitality and leisure environments, it can provide clear audio reinforcement for bars, gyms, function rooms and small stages. The FBT Ventis 110A measures 329 x 575 x 325mm and weighs 15.6kg, making it manageable for portable use while still offering professional cabinet construction and output. Transport dimensions are listed at 420 x 675 x 400mm, with a transport weight of 18.1kg. For customers looking for a compact active 10" loudspeaker with high output, onboard DSP, rotatable coverage, birch plywood construction and flexible installation options, the Ventis 110A is a capable solution for both installed and portable sound reinforcement.

Read more less

The FBT Ventis 108A is a compact professional active point source loudspeaker designed for live sound, installation and portable AV applications where high output, clear sound and flexible positioning are required. Built around an 8 inch low frequency driver and a 1 inch high frequency compression driver, the Ventis 108A delivers powerful performance from a relatively compact cabinet, making it suitable for venues, AV installers, hire companies, schools, houses of worship, corporate events, hospitality spaces and small to medium live performance environments. The Ventis 108A is a 2 way active loudspeaker with integrated bi-amplification. The low frequency section is powered by a 700W RMS Class-D amplifier, while the high frequency section uses a 200W RMS Class-H/AB amplifier. This gives the speaker a total of 900W RMS amplification, delivering strong output, efficient performance and detailed high frequency reproduction. FBT specifies a maximum SPL of 123dB continuous and 131dB peak, making the Ventis 108A capable of producing impressive sound levels for its size. The loudspeaker features a frequency response of 65Hz to 20kHz at -6dB, making it suitable for full-range speech, music playback, front fill, delay fill, under-balcony use and compact PA applications. For systems requiring extended low frequency performance, the Ventis 108A can also be paired with a suitable subwoofer as part of a wider sound reinforcement system. Its size and output make it particularly useful where a smaller enclosure is required without stepping too far down in performance. A key benefit of the Ventis 108A is its birch plywood cabinet construction. The enclosure is scratch resistant and internally braced, helping provide a robust finish for professional use. This makes it suitable for both portable and fixed applications, including event work, stage use, school halls, theatre spaces, small venues and commercial AV installations. The cabinet includes two aluminium handles with rubber inserts, giving users a practical way to handle and position the speaker during setup and transport. The 80° horizontal by 50° vertical constant directivity horn is rotatable, giving installers and users the flexibility to optimise coverage depending on whether the loudspeaker is used horizontally or vertically. This is valuable in fixed installations, front-fill applications, under-balcony positions and stage monitoring setups where controlled coverage helps direct sound towards the listening area. The rotatable horn makes the Ventis 108A more adaptable than a fixed-dispersion cabinet, particularly in rooms where mounting orientation may be dictated by space or sightline requirements. The onboard DSP gives the user practical control over the sound of the loudspeaker. Six pre-optimised presets are available, including Original/Live, Vocal, DJ, Touring, Loudness and Warm. Two additional user preset slots are also provided, each with five parametric EQ filters. This allows the speaker to be adapted for different applications, from speech-focused installations and vocal reinforcement through to DJ playback and live performance. Further DSP functions include a high-pass filter, mic/line selector, low, mid and high EQ, and a delay line adjustable between 0 and 10 metres. Users can also choose between three limiter modes: MIN, NORMAL and MAX. These features make the Ventis 108A highly practical for real-world AV work, where room conditions, source type and system layout can vary from one application to another. For installers, the built-in DSP can reduce the need for additional external processing in simpler systems. The input section includes XLR with loop-through and RCA stereo connectivity, making the speaker suitable for a variety of source and system configurations. The XLR input and loop output are useful for professional audio setups where multiple speakers need to be linked, while the RCA stereo input can be useful for playback sources or simpler audio systems. The listed input impedance is 22kOhm, and the speaker is supplied with a 5m power cord. The Ventis 108A is also highly flexible from an installation perspective. It includes a 1.38 inch pole mount socket for use on speaker stands or poles, a 45° sloped profile for use as a compact stage monitor, and four M5 rigging points for suspension options. This allows the same speaker to be used as a main PA cabinet, front fill, under-balcony speaker, stage monitor or fixed installation loudspeaker depending on the project requirement. With dimensions of 274 x 500 x 300mm and a net weight of 14kg, the FBT Ventis 108A is compact enough for portable use while still offering professional output and build quality. Transport dimensions are listed as 355 x 545 x 385mm, with a transport weight of 15.5kg. For AV installers, venues and event users looking for a compact active loudspeaker with serious performance, flexible DSP, rotatable horn coverage and a durable birch plywood enclosure, the FBT Ventis 108A is a strong solution for both installed and portable sound reinforcement applications.

Read more less