Made from hard wearing wipeable nylon, this soft lined padded cover will protect the X SUB 15 while on the road.

Read more less

The FBT X-SUB 115SA is a professional active 15" bass reflex subwoofer designed to add powerful low-frequency reinforcement to portable and installed sound systems. Built around a 15" woofer with a 3" voice coil and a 1200W Class D amplifier, it provides strong bass performance in a compact cabinet format suitable for mobile DJs, live sound users, venues, schools, houses of worship, hospitality spaces, AV installers and event production companies. As part of FBT’s X-SUB range, the X-SUB 115SA is designed to work as a low-frequency extension for active loudspeaker systems, including FBT X-LITE and X-PRO series speakers. This makes it a strong choice for users who need additional bass impact for music playback, live vocals, DJ sets, presentations, fitness spaces, small stages, function rooms and general sound reinforcement. FBT specifically describes the X-SUB range as designed as the perfect partner for the X-LITE and X-PRO series. The subwoofer uses a bass reflex cabinet design to deliver efficient low-frequency output from a manageable enclosure. Its frequency response is listed at 42Hz to 120Hz at -6dB, giving it useful extension for kick drum, bass guitar, electronic music, DJ playback and full-range programme audio. With a maximum SPL of 135dB half-space, the X-SUB 115SA provides substantial output for a compact 15" active subwoofer. Power is delivered by an integrated 1200W Class D amplifier. This powered format removes the need for a separate amplifier rack, helping simplify system setup and reducing the amount of additional equipment required. For portable users, this means faster deployment and fewer components to transport. For fixed installations, it provides a matched amplifier and loudspeaker solution that is straightforward to specify and integrate. The onboard DSP processor includes 4 presets, giving users practical control over the subwoofer’s response for different applications and speaker pairings. FBT lists the presets as 2 responses with 2 different cut-off frequencies, allowing the subwoofer to be adapted to suit different system layouts. This is useful when pairing the X-SUB 115SA with different top speakers or using it across multiple room types and event formats. The control panel provides stereo combo XLR/jack inputs and outputs, stereo XLR high-pass filter outputs, level control, preset selection, 0°/180° phase reversal and protection/limiter LED indicators. These controls make the subwoofer practical for professional PA systems, allowing signal to be routed cleanly to full-range speakers while giving the operator essential tools for level matching, phase alignment and basic system optimisation. The X-SUB 115SA is built from 15mm birch plywood with a scratch-resistant black painted finish. This gives the cabinet the durability required for portable audio work, live events and fixed installations where equipment needs to withstand regular handling. The cabinet also includes two aluminium handles, helping users lift and position the subwoofer during setup and pack-down. Optional 100mm transport wheels are available for users who need improved mobility. An M20 top-mounted stand adapter is included, allowing a compatible full-range speaker to be pole-mounted above the subwoofer. This supports a clean sub-and-top system layout for mobile DJs, schools, bars, churches, small venues and hire systems. When paired with suitable active top speakers, the X-SUB 115SA can form the low-frequency foundation of a compact but professional PA system. The subwoofer measures 455 x 584 x 570mm and weighs 30.3kg. Transport dimensions are listed as 710 x 650 x 600mm, with a transport weight of 36.5kg. These figures are important for users planning storage, van loading, venue access and manual handling. For customers looking to add controlled low-frequency output to an active PA system, the FBT X-SUB 115SA offers a strong balance of power, portability and professional build quality. With a 15" driver, 1200W Class D amplifier, 135dB SPL, DSP presets, XLR signal routing, birch plywood construction and M20 pole mount, it is a practical subwoofer for portable sound, venue installations and AV systems requiring reliable bass reinforcement.

Read more less

Made from hard wearing wipeable nylon, this soft lined padded cover will protect the X-PRO 15 while on the road.

Read more less

Made from hard wearing wipeable nylon, this soft lined padded cover will protect the X-PRO 12 while on the road.

Read more less

Made from hard wearing wipeable nylon, this soft lined padded cover will protect the X-PRO 10 while on the road.

Read more less

Made from hard wearing wipeable nylon, this soft lined padded cover will protect the X-LITE108A while on the road.

Read more less

Made from hard wearing wipeable nylon, this soft lined padded cover will protect the X-LITE15A while on the road.

Read more less

Made from hard wearing wipeable nylon, this soft lined padded cover will protect the X-LITE12A while on the road.

Read more less

Made from hard wearing wipeable nylon, this soft lined padded cover will protect the X-LITE10A while on the road.

Read more less

Made from hard wearing wipeable nylon, this soft lined padded cover will protect the X SUB 118 while on the road.

Read more less

The FBT VN 4000 is a complete active PA system built around two Ventis 112A active top speakers and two Subline 118SA active subwoofers. As the largest package in the VN series, it delivers a combined 4200W RMS and provides a powerful full-range system with substantial low-frequency performance, strong mid/high clarity and a coordinated set of core accessories included. The package includes the loudspeakers, subwoofers, telescopic poles, pole carry bag and padded covers for the tops and subs.  The system uses a four-box format, pairing 12" Ventis active tops with 18" Subline active subwoofers. This gives the VN 4000 a larger and more capable system footprint than the smaller VN packages, making it suitable where a more substantial active PA solution is required. The Ventis 112A tops handle the main vocal, midrange and high-frequency output, while the Subline 118SA subwoofers provide the extended low-frequency foundation. Each Ventis 112A top speaker features a 12" low frequency woofer and a 1" B&C high frequency compression driver in a birch plywood cabinet. The 12" format provides a strong balance of output, vocal clarity and full-range musical detail, while remaining manageable as a professional active top cabinet. Each speaker includes integrated bi-amplification, with 700W RMS for the low frequency section and 200W RMS for the high frequency section. The Ventis 112A cabinets are built from birch plywood with a scratch-resistant finish and full-face grille. Each cabinet includes an integrated handle, M10 suspension points and a 35mm top-hat, allowing the speakers to be used above the supplied sub poles or deployed separately where required. This makes the system more flexible than a fixed-format package, as the top speakers can also be used independently for smaller setups. The Subline 118SA subwoofers provide the low-frequency performance for the VN 4000 package. Each subwoofer uses an 18" driver powered by a 1200W RMS Class D amplifier, giving the system a much deeper and more powerful bass response than packages based around smaller 12" or 15" subs. The 18" format is well suited to users who need strong bass extension, higher output and a more complete full-range system. A key advantage of the VN 4000 is its ability to operate as a full four-box system or be separated into smaller configurations when required. The complete setup can be used where maximum output and low-frequency extension are needed, while the individual tops and subs can also be deployed in reduced formats for smaller spaces or lower-output requirements. FBT describes the VN 4000 as a powerful full-range system that can be broken down into smaller setups when needed. The included telescopic poles allow the Ventis 112A top speakers to be mounted above the Subline 118SA subwoofers in a conventional sub-and-top layout. This provides a clean and professional system arrangement, helping position the top speakers at a more suitable height for audience coverage. A carry bag is supplied for the poles, keeping accessories organised during storage and transport. Padded covers are included for both the top speakers and subwoofers. This adds practical value to the package by helping protect the cabinets when the system is stored, moved or transported. For users specifying a complete system, having the correct covers and poles included helps reduce the need to source essential accessories separately. The system is substantial but still modular in handling. Each Ventis 112A weighs 20.6kg, while each Subline 118SA weighs 44.5kg. This should be considered when planning transport, storage and setup, but the separate cabinet format keeps the system more manageable than a single large integrated PA solution. Please look at the individual product pages for full specification on each component. Signal supplied separately. The FBT VN 4000 is a strong choice for customers looking for a complete high-output active PA package with 12" tops, 18" subwoofers and essential accessories included. With 2x Ventis 112A active speakers, 2x Subline 118SA active subwoofers, 4200W RMS system power, telescopic poles, pole carry bag and padded covers, it provides a professional ready-made FBT sound system for users who need a powerful full-range PA package.

Read more less

The FBT VN 3000 is a complete active PA system built around two Ventis 110A active top speakers and two Subline 115SA active subwoofers. Designed as a ready-made professional sound system package, it delivers a combined 3200W RMS and includes the main speakers, subwoofers, telescopic poles, pole carry bag and padded covers for the tops and subs. It is available in black or white, giving customers a coordinated FBT system package with the core components and accessories included. The VN 3000 uses a four-box format, combining a pair of 10" Ventis active tops with a pair of 15" Subline active subwoofers. This configuration provides a strong balance of vocal clarity, full-range musical detail and low-frequency extension. It sits above the smaller VN 1000 and VN 2000 style packages, making it a suitable step up where greater bass output and a larger top speaker format are required. Each Ventis 110A top speaker features a 10" low frequency woofer and 1" B&C high frequency compression driver in a birch plywood cabinet. The 10" format gives the system a compact but capable mid/high section, with enough output for speech, music playback and live sound reinforcement while remaining manageable for transport and setup. The Ventis 110A cabinet is finished in scratch-resistant paint and includes an integrated handle, 35mm top-hat and M10 suspension points for flexible deployment. The Ventis 110A speakers use integrated bi-amplification, with 700W RMS for the low frequency section and 200W RMS for the high frequency section. This gives each top speaker 900W RMS of onboard amplification, removing the need for external power amplifiers. As with the wider Ventis active range, the low frequency amplifier section uses Class D technology, while the high frequency section uses Class H/AB amplification. The Subline 115SA subwoofers provide the low-frequency foundation of the system. Each subwoofer uses a 15" driver and a 700W RMS active amplifier platform, giving the VN 3000 more bass depth and output than systems based around smaller 12" subs. The 15" subwoofer format is well suited to users who need a stronger low-end response for music playback, performance systems and general PA use without moving into larger 18" subwoofer packages. The system includes a pair of telescopic poles, allowing the Ventis 110A tops to be mounted directly above the Subline 115SA subwoofers. This creates a clean and conventional sub-and-top PA layout, helping achieve better audience coverage and a professional stage or venue presentation. A carry bag for the poles is also included, helping keep accessories organised during storage and transport. Padded covers are supplied for both the top speakers and subwoofers. This is a useful addition for protecting the cabinets when the system is being moved, stored or transported between jobs. The included covers also help make the package feel complete, reducing the need to source essential protection accessories separately. A key benefit of the VN 3000 is its ability to work as a complete system or be separated into smaller configurations. The full four-box setup can be used where maximum output and low-frequency extension are required, while the tops and subs can be deployed in reduced formats for smaller spaces or lower-output requirements. This makes the package more flexible than a fixed-format column or all-in-one system. The system is practical from a handling perspective while still offering a substantial performance step. Each Ventis 110A weighs 15.6kg, while each Subline 115SA weighs 31.6kg. This gives the VN 3000 a more powerful and capable footprint than smaller compact systems while keeping the individual components manageable as separate active cabinets. Please look at the individual product pages for full specification on each component. Signal leads supplied separately. The FBT VN 3000 is a strong choice for customers looking for a complete active PA system with 10" tops, 15" subwoofers and essential accessories included. With 2x Ventis 110A active speakers, 2x Subline 115SA active subwoofers, 3200W RMS system power, telescopic poles, pole carry bag and padded covers, it provides a professional ready-made FBT system for users who want an integrated full-range PA package.

Read more less