{"product_id":"steel-wallplate-with-single-xlr-socket","title":"Steel Wallplate with Single XLR Socket","description":"\u003cp data-start=\"722\" data-end=\"1320\"\u003eThe AV:Link Steel Wallplate with XLR Socket is a professional installed audio connection plate designed to provide a clean, permanent XLR socket in a standard wall-mounted format. Built into a brushed steel 1-gang faceplate, it is ideal for AV installers, electricians, audio contractors and facilities teams who need a simple and robust way to present an XLR audio connection at a fixed location. The manufacturer describes it as suitable for domestic, commercial and educational applications, with solder terminal rear connections and fixing screws supplied. \u003cspan class=\"\" data-state=\"closed\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-start=\"1322\" data-end=\"1805\"\u003eThis wallplate is particularly useful where XLR audio equipment needs to be connected in a different location without leaving trailing cables across the room. It can be used in classrooms, school halls, lecture rooms, meeting spaces, conference rooms, churches, rehearsal rooms, studios, community venues, hospitality areas and small performance spaces. By moving the connection point onto the wall, the installation becomes tidier, easier to use and more professional in appearance.\u003c\/p\u003e\n\u003cp data-start=\"1807\" data-end=\"2270\"\u003eThe single XLR socket is suitable for a wide range of installed audio applications. It may be used as a microphone input, a balanced line-level connection, a tie-line point, a lectern audio input or a fixed connection between a room location and a central AV rack. For presentation and education environments, it offers a practical way to connect a wired microphone, audio source or other compatible XLR device into an amplifier, mixer, DSP or wider sound system.\u003c\/p\u003e\n\u003cp data-start=\"2272\" data-end=\"2730\"\u003eIn a school hall, the plate could be installed near a stage, lectern or presentation position to provide a fixed microphone input back to the main sound system. In a meeting room, it could be used as a clean input point for a gooseneck microphone, local audio feed or portable mixer connection. In a church or community venue, it could help reduce loose cabling by creating a defined audio connection point for occasional use, events or speech reinforcement.\u003c\/p\u003e\n\u003cp data-start=\"2732\" data-end=\"3164\"\u003eThe brushed steel finish gives the wallplate a strong, professional appearance and makes it suitable for installations where a more durable faceplate is preferred. It offers a cleaner and more permanent finish than leaving loose XLR cables accessible through walls, panels or cabinets. This makes it particularly useful in public-facing or shared-use environments where the system needs to look tidy and withstand regular operation.\u003c\/p\u003e\n\u003cp data-start=\"3166\" data-end=\"3625\"\u003eThe wallplate fits a standard single mains back box, making it straightforward to specify for many UK installation environments. It is supplied with fixing screws, allowing it to be mounted neatly into a suitable back box or compatible surface mounting enclosure. When planning the installation, the back box depth and cable bend space should be considered, especially when using thicker balanced audio cable or when the cable route is tight behind the plate.\u003c\/p\u003e\n\u003cp data-start=\"3627\" data-end=\"4036\"\u003eRear solder terminal connections allow the installer to terminate suitable audio cabling directly to the wallplate. This provides a permanent connection method for fixed installations and helps keep the rear wiring secure when fitted correctly. As with any balanced audio installation, good cable selection, correct pin wiring and clean termination are important to minimise hum, interference and signal loss.\u003c\/p\u003e\n\u003cp data-start=\"4038\" data-end=\"4381\"\u003eThe product measures 86 x 86 x 27mm and weighs 64g, making it compact enough for standard single gang audio wallplate applications. The shallow faceplate depth makes it suitable for wall-mounted audio input points, AV rack areas, lecterns, cabinets and presentation spaces where a neat finish is required. \u003cspan class=\"\" data-state=\"closed\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-start=\"4383\" data-end=\"4800\"\u003eFor AV installers and contractors looking for a straightforward fixed XLR connection point, the AV:Link Steel Wallplate with XLR Socket provides a durable and professional solution. With its brushed steel finish, standard 1-gang format, solder terminal rear connections and supplied fixings, it is well suited to permanent audio installations where reliable connectivity and a clean installed appearance are required.\u003c\/p\u003e","brand":"AVSL","offers":[{"title":"Default Title","offer_id":56643106177410,"sku":"123.316UK","price":11.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0958\/5767\/2578\/files\/SteelWallplatewithXLRSocket.png?v=1778585609","url":"https:\/\/www.theavbarn.co.uk\/products\/steel-wallplate-with-single-xlr-socket","provider":"The AV Barn","version":"1.0","type":"link"}